Make your desktop into a workshop with the Snapmaker 3-in-1 3D printer, Laser engraver and CNC carver!
|Largeur du lit||12.5 cm|
|Profondeur du lit||12.5 cm|
|Hauteur d'impression||12.5 cm|
|Résolution axe Z||0.1 mm|
Propriétés de l'extrudeuse
|Number of extruders||1|
|Diamètre du Filament||1.75 mm|
|Max. hot-end temperature||250 °C|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
|Max. heated bed. temp.||80 °C|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
|Auto Bed Leveling
The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.